THE EASY CHOICE WHEN LUXURY, PERFORMANCE AND VALUE MATTER.
When your guests arrive, you want to make a lasting first impression. Knowing that, we’ve outfitted both our four and six-seat Concierge models with a wealth of features to impress even the most discerning passengers. Thanks to extra-smooth handling and a quiet ride, plus the widest bench seats in the industry, it’s first-class luxury that sets the stage for a memorable visit.
- Features
- Specs
- Options
- Photos
General Information
Model
Concierge 6 (Gas EFI)
Color
Rich Brown Metallic
Engine
Engine
Yamaha-built, low-emission single cylinder 60° incline OHV
Cooling system - Forced Cooling
Carburetion
Fuel system - Electronic injection
Lubrication
Oil capacity - 1 qt. (1 l)
Air Filter
Two-stage, urethane-foam pre-cleaner, and high-capacity pleated paper cartridge
Measurements
Length
Overall - 161.4 in. (4,100 mm)
Height
Overall with suntop - 75.2 in. (1,910 mm)
Overall without suntop - 46.9 in. (1,190 mm)
Floor board height - 13.5 in. (342 mm)
Width
Overall - 47.2 in. (1,200 mm)
Weight
Dry - 1,010 lb. (458 kg)
Wheelbase
131.4 in. (3,337 mm)
Ground Clearance
Minimum - 4.3 in. (110 mm)
Operational
Brakes
Self-adjusting 4-wheel mechanical drum
Suspension
Front - Tru-Trak II™ fully independent automotive-style strut
Rear - Unit swing arm with coil springs over hydraulic shock absorbers
Tires
Front wheel tread - 34.3 in. (870 mm)
Rear wheel tread - 38.6 in. (980 mm)
Seating
Capacity - 6 persons
Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and matted to a warp and moisture-resistant polypropylene bottom strengthened with plated steel inserts
Turning Radius
Minimum - 14.4 ft. (4.4 m)
Steering
Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends
Speed
Maximum forward / Reverse - 19 mph (31 km/h)
Other
Additional Colors
Glacier
Bluestone Metallic
Jasper Metallic
Moonstone Metallic
Onyx Metallic
Sandstone Metallic
Rich Brown Metallic
Aqua Blue Metallic
Frame
HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step phosphate treatment, electro-deposition epoxy-based coating, and an electrostatically applied polyester/urethane powder topcoat
Warranty
Standard 2-year limited